Crankshaft Grinders Machines Archives

On Site Crankshaft Repair of HIMSEN HYUNDAI 6H 17/28 | Turkey

RA Power Solutions successfully repaired the Crankshaft of Himsen Hyundai 6H17/28 engine at MIP Mersin, Turkey. The engine, owned by an Italian company, experienced a major breakdown due to a failure in one of its auxiliary engines.

RA Power Solutions promptly deployed two skilled technicians equipped with onsite crankshaft grinding tools. The repair was efficiently conducted while the vessel remained anchored at MIP Mersin, ensuring minimal downtime and reliable restoration of the engine.

Following are the major Engine and Crankpin details:

S. No.	Engine and Crankpin Details
1.	Engine Make	HIMSEN HYUNDAI
2.	Engine Model	6H 17/28
3.	Crankpin Diameter Standard	175.00MM
4.	Crankpin Bearing Width	60.00 MM
5.	Place of Execution of Grinding of Crankpin	MIP Mersin, Turkey
6.	Name of Shipping Company	Reputed Company from Italy

Key Observations of the Crankshaft:

Visual Inspection Findings:
(i) The breakdown was caused by the failure of the lubricating oil pump, resulting in damage to all connecting rod bearings.
(ii) Bearing material was embedded on all six crankpins and was meticulously removed.
(iii) Dimensional inspection conducted after polishing revealed taper and ovality measurements ranging from 0.22 mm to 0.86 mm.

MPI Test Before Crankshaft Grinidng and Repair

Image Showing Before Grinding and Polishing

The Dimensional Inspection Report of Six (6) Number Crankpins of HIMSEN HYUNDAI 6H 17/28:

SIZE OF CR PINS BEFORE REPAIR
	A	Aa	C	Cc	B	Bb	Min	STD	Ovality
CR-1	174.74	174.85	174.62	174.73	174.66	174.88	174.62	175.00	0.38MM
CR-2	174.83	174.92	174.80	174.78	174.83	174.93	174.78	175.00	0.22MM
CR-3	174.70	174.90	174.55	174.69	174.48	174.54	174.48	175.00	0.52MM
CR-4	174.78	174.88	174.79	174.72	174.79	174.92	174.72	175.00	0.28MM
CR-5	174.78	174.88	174.76	174.92	174.72	174.78	174.72	175.00	0.28MM
CR-6	174.22	174.80	174.14	174.78	174.37	174.85	174.14	175.00	0.86MM

(iv) Hardness testing indicated acceptable levels overall, with minor exceptions in a few areas, which were assessed as non-critical.
(vi) Magnetic Particle Inspection (MPI) revealed minor hairline cracks, while all other parameters remained within acceptable limits.

CR Pin Before Grinding of HIMSEN HYUNDAI 6H 17/28

Actions Taken by RA Power Solutions Technicians:

1. The grinding of all six (6) crankpins was undertaken by our insitu crankshaft grinding machine.
2. Three (3) number of crankpins diameter was reduced by 1.00 MM and the final size was maintained as 174.00 MM.
3. Three (3) number of crankpins diameter was reduced by 1.50 MM and the final size was maintained at 173.50 MM.

Final Report After Grinding is Pasted Below:

SIZE OF CR PINS AFTER REPAIR
	A	Aa	C	Cc	B	Bb	Min	U/S	Ovality
CR-1	173.48	173.49	173.49	173.48	173.50	173.50	173.48	173.50	0.02MM
CR-2	173.98	173.99	174.00	173.99	173.98	173.99	173.98	174.00	0.02MM
CR-3	173.49	173.50	173.50	173.48	173.49	173.50	173.48	173.50	0.02MM
CR-4	173.98	173.99	173.98	174.00	173.98	174.00	173.98	174.00	0.02MM
CR-5	173.99	173.99	173.98	174.00	173.98	173.99	173.98	174.00	0.02MM
CR-6	173.48	173.49	173.49	173.50	173.50	173.48	173.48	173.50	0.02MM

We ensure all six crankpins are maintained with a stringent tolerance of 0.02 mm, delivering exceptional accuracy and optimal performance in every project.

Global Expertise in Crankshaft Repair
RA Power Solutions is a global leader in onsite crankshaft repair and grinding services. With extensive experience, we have successfully completed projects across the globe, including Dubai, Fujairah, Qatar, Saudi Arabia, Oman, Iraq, Togo, Malta, Freetown, Egypt, Malaysia, Iran, Indonesia, Vietnam, Jordan, and many other locations.

CR Pin Grinding of HIMSEN HYUNDAI — **CR Pin After Grinding of HIMSEN HYUNDAI**

Our highly skilled technicians are available 24/7 and can be deployed at short notice. Many of our team members hold valid US visas, allowing us to serve clients in South America, the Caribbean, and other regions efficiently.

Get in Touch for Professional Crankshaft Services:
Email: rajshahani@rapowersolutions.com | info@rapowersolutions.com
Phone: +91 9582647131 | +91 9810012383.

RA Power Solutions successfully repaired the Crankshaft of Himsen Hyundai 6H17/28 engine at MIP Mersin, Turkey. The engine, owned by an Italian company, experienced a major breakdown due to a failure in one of its auxiliary engines. RA Power Solutions promptly deployed two skilled technicians equipped with onsite crankshaft grinding tools. The repair was efficiently … Continue reading “On Site Crankshaft Repair of HIMSEN HYUNDAI 6H 17/28 | Turkey”

In Situ Crankshaft Grinding Machine | Onsite Crankshaft Grinding & Polishing Machine | Crankshaft Grinder – RA Power Solutions

The in situ crankshaft grinding and crankshaft repair machine is a unique invention and is of great assistance to the shipping companies as they can not remove the crankshaft from the vessel and send it to the workshop for repair. Again, the crankshaft grinding machines installed in the workshop are not an ideal solution due to its high cost and lack of know-how to operate. RA Power Solutions manufactures and exports onsite crankshaft grinding and repair machines having a range of 35 mm to 700 mm in terms of the diameter of crankpin and main journal of the crankshaft.

Crankshaft Grinding Machine of Bigger Diameter

Crankshaft Grinding Machine has the following features:

Onsite crankshaft grinding and polishing machine is compact, lightweight, and can be inserted from the inspection window of the engine block.
It is simple in design, easy to operate, and maintain
Crankshaft grinding and polishing machine body is manufactured out of titanium steel having the property of absorbing the vibrations. With the vibration or almost zero vibration machine can also be used for crankshaft grinding and crankshaft repair while sailing of the vessel.
- All parameters and tolerances as recommended by the engine manufacturer can be strictly maintained.
With the use of onsite crankshaft grinding and polishing machine, repair can be done in one setting. Thus saving the time.
This crankshaft grinding and polishing machine is manufactured with a pneumatic or electrical drive depending on the client’s requirement.
On Job training for the operation and maintenance of the crankshaft grinding machine is extended through our experienced technicians.
Crankshaft repair machine is supplied in a toolbox and can be transported all over the world.

**Onsite Crankshaft Grinding & Repair Machine**

We have sold more than 70 crankshaft grinding machines all over the world that includes shipping companies, leading repair workshops and power plants, etc.

The author of the blog is Mr. Raj Shahani, Managing Director of the company. He is having 40 years of experience in solving the major issues related to repair and overhauling of engines, grinding and repair of the crankshaft, and many more related to the high capacity engine.

For more information regarding onsite machining of crankshaft, in situ crankshaft grinding repair, crankshaft grinding machines, onsite crankshaft grinding, and crankshaft polishing equipment, please email us at rajshahani@rapowersolutions.com or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

**Repair of Crankpin by Crankshaft Grinding Machine**

**Onsite Grinding Machine for Small Diameter**

RA Power Solutions manufactures in situ crankshaft grinding and polishing machine. It is a revolutionary, lightweight, easy-to-operate, and compact crankshaft grinding and crankshaft polishing machine which can undertake the repair of crankpins up to the diameter of 700 mm without removing the crankshaft from the engine block. The in situ crankshaft grinding and crankshaft repair … Continue reading “In Situ Crankshaft Grinding Machine | Onsite Crankshaft Grinding & Polishing Machine | Crankshaft Grinder – RA Power Solutions”

Crankshaft Grinding Machine – RA Power Solutions

The crankshaft grinding machine which is lightweight, portable, and easy to operate is manufactured by RA Power Solutions. The crankshaft grinding machine is revolutionary equipment developed and manufactured by us.

A few years the back industry had no option but to remove the crankshaft from the engine block, pack it and transport it to the workshop for repairs which was not only expensive but was time-consuming. With the introduction of an onsite crankshaft grinding machine, the removal of the crankshaft and sending it to the designated workshop is outdated and is no more required by the industry.

The crankshaft grinding machine manufactured by RA Power Solutions can undertake onsite crankshaft grinding and polishing, crankpin, and main journal diameter ranging from 60 mm to 700 mm. The latest design of the crankshaft grinding machine can undertake grinding and polishing in one setting. The minimum vibration while in the operation of the crankshaft grinding machine results in the maintenance of close tolerances and high surface finish.

RA Power Solutions as of date have sold more than 63 crankshaft grinder to countries like the Netherlands, Belgium, Iraq, Saudi Arabia, South America, Jordan, Ecuador, Singapore, Indonesia, Dubai, Brazil, Scotland, Greece, Italy, UK, Nigeria, etc.

Since the machine is priced low, it is highly recommended for repair workshops, shipping companies, power plants, and the general industry. The onsite training, operation, and maintenance of the crankshaft grinding machines are provided by highly experienced technicians with hand of experience in crankshaft repair of four decades.

For more information regarding crankshaft grinding services, crankshaft grinder, onsite crankshaft grinding, and crankshaft grinders machines, please email us at rajshahani@rapowersolutions.com or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

The crankshaft grinding machine which is lightweight, portable, and easy to operate is manufactured by RA Power Solutions. The crankshaft grinding machine is revolutionary equipment developed and manufactured by us. A few years the back industry had no option but to remove the crankshaft from the engine block, pack it and transport it to the … Continue reading “Crankshaft Grinding Machine – RA Power Solutions”