crankshaft polisher for sale Archives

RA Power Solutions successfully repaired the Crankshaft of Himsen Hyundai 6H17/28 engine at MIP Mersin, Turkey. The engine, owned by an Italian company, experienced a major breakdown due to a failure in one of its auxiliary engines.

RA Power Solutions promptly deployed two skilled technicians equipped with onsite crankshaft grinding tools. The repair was efficiently conducted while the vessel remained anchored at MIP Mersin, ensuring minimal downtime and reliable restoration of the engine.

Following are the major Engine and Crankpin details:

S. No.	Engine and Crankpin Details
1.	Engine Make	HIMSEN HYUNDAI
2.	Engine Model	6H 17/28
3.	Crankpin Diameter Standard	175.00MM
4.	Crankpin Bearing Width	60.00 MM
5.	Place of Execution of Grinding of Crankpin	MIP Mersin, Turkey
6.	Name of Shipping Company	Reputed Company from Italy

Key Observations of the Crankshaft:

Visual Inspection Findings:
(i) The breakdown was caused by the failure of the lubricating oil pump, resulting in damage to all connecting rod bearings.
(ii) Bearing material was embedded on all six crankpins and was meticulously removed.
(iii) Dimensional inspection conducted after polishing revealed taper and ovality measurements ranging from 0.22 mm to 0.86 mm.

MPI Test Before Crankshaft Grinidng and Repair

Image Showing Before Grinding and Polishing

The Dimensional Inspection Report of Six (6) Number Crankpins of HIMSEN HYUNDAI 6H 17/28:

SIZE OF CR PINS BEFORE REPAIR
	A	Aa	C	Cc	B	Bb	Min	STD	Ovality
CR-1	174.74	174.85	174.62	174.73	174.66	174.88	174.62	175.00	0.38MM
CR-2	174.83	174.92	174.80	174.78	174.83	174.93	174.78	175.00	0.22MM
CR-3	174.70	174.90	174.55	174.69	174.48	174.54	174.48	175.00	0.52MM
CR-4	174.78	174.88	174.79	174.72	174.79	174.92	174.72	175.00	0.28MM
CR-5	174.78	174.88	174.76	174.92	174.72	174.78	174.72	175.00	0.28MM
CR-6	174.22	174.80	174.14	174.78	174.37	174.85	174.14	175.00	0.86MM

(iv) Hardness testing indicated acceptable levels overall, with minor exceptions in a few areas, which were assessed as non-critical.
(vi) Magnetic Particle Inspection (MPI) revealed minor hairline cracks, while all other parameters remained within acceptable limits.

CR Pin Before Grinding of HIMSEN HYUNDAI 6H 17/28

Actions Taken by RA Power Solutions Technicians:

1. The grinding of all six (6) crankpins was undertaken by our insitu crankshaft grinding machine.
2. Three (3) number of crankpins diameter was reduced by 1.00 MM and the final size was maintained as 174.00 MM.
3. Three (3) number of crankpins diameter was reduced by 1.50 MM and the final size was maintained at 173.50 MM.

Final Report After Grinding is Pasted Below:

SIZE OF CR PINS AFTER REPAIR
	A	Aa	C	Cc	B	Bb	Min	U/S	Ovality
CR-1	173.48	173.49	173.49	173.48	173.50	173.50	173.48	173.50	0.02MM
CR-2	173.98	173.99	174.00	173.99	173.98	173.99	173.98	174.00	0.02MM
CR-3	173.49	173.50	173.50	173.48	173.49	173.50	173.48	173.50	0.02MM
CR-4	173.98	173.99	173.98	174.00	173.98	174.00	173.98	174.00	0.02MM
CR-5	173.99	173.99	173.98	174.00	173.98	173.99	173.98	174.00	0.02MM
CR-6	173.48	173.49	173.49	173.50	173.50	173.48	173.48	173.50	0.02MM

We ensure all six crankpins are maintained with a stringent tolerance of 0.02 mm, delivering exceptional accuracy and optimal performance in every project.

Global Expertise in Crankshaft Repair
RA Power Solutions is a global leader in onsite crankshaft repair and grinding services. With extensive experience, we have successfully completed projects across the globe, including Dubai, Fujairah, Qatar, Saudi Arabia, Oman, Iraq, Togo, Malta, Freetown, Egypt, Malaysia, Iran, Indonesia, Vietnam, Jordan, and many other locations.

CR Pin Grinding of HIMSEN HYUNDAI — **CR Pin After Grinding of HIMSEN HYUNDAI**

Our highly skilled technicians are available 24/7 and can be deployed at short notice. Many of our team members hold valid US visas, allowing us to serve clients in South America, the Caribbean, and other regions efficiently.

Get in Touch for Professional Crankshaft Services:
Email: rajshahani@rapowersolutions.com | info@rapowersolutions.com
Phone: +91 9582647131 | +91 9810012383.

RA Power Solutions successfully repaired the Crankshaft of Himsen Hyundai 6H17/28 engine at MIP Mersin, Turkey. The engine, owned by an Italian company, experienced a major breakdown due to a failure in one of its auxiliary engines. RA Power Solutions promptly deployed two skilled technicians equipped with onsite crankshaft grinding tools. The repair was efficiently … Continue reading “On Site Crankshaft Repair of HIMSEN HYUNDAI 6H 17/28 | Turkey”

In case of bearing failure or continuous running of the crankshaft, it develops bearing line marks, pitting, or rough surfaces. This requires polishing of the crankshaft, crankpin, and main journal.

A revolutionary onsite portable crankshaft polishing machine has been introduced by RA Power Solutions Pvt. Ltd. which is portable, lightweight, easy to operate, and can be taken to the site. The polishing of the crankshaft and crankpin is possible without removing the crankshaft from the engine block. The onsite crankshaft polishing machine is manufactured from 50 mm to 700 mm in diameter.

The use of a crankshaft polishing machine removes the bearing line marks, and pitting and improves the surface finish as required by the manufacturer.

**Crankshaft Polishing Machine Packed in Steel Box**

We extend free training to the customers having a duration of 1 week during which the operation of the crankshaft polishing machine, and maintenance are explained and demonstrated.

The cost of the machine is kept low as it is the company’s objective that nobody should spend an exorbitant amount on polishing and grinding the crankshaft anymore and sending it to the workshop. More than 60 machines are sold all over the world.

**Close-Up View of Crankshaft Polishing Machine After Packing**

**Packing in Progress Insitu Crankshaft Grinding Machine**

The author is Mr. Raj Shahani, Managing Director of RA Power Solutions Pvt. Ltd. having 37 years of experience in working on large crankshafts. The crankshaft grinding and polishing machine, and crankshaft polishing equipment has been developed through consistent and focused R&D with field trails undertaken in different conditions.

The aim of the company is to reduce the cost of repair of crankshaft and stop the outdated practice of sending crankshafts to the workshops. For more information on crankshaft polisher, crankshaft polisher machine, crankshaft polishing tool, crankshaft polisher for sale, polishing crankshaft journals, and crankshaft polishing equipment contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

In case of bearing failure or continuous running of the crankshaft, it develops bearing line marks, pitting, or rough surfaces. This requires polishing of the crankshaft, crankpin, and main journal. A revolutionary onsite portable crankshaft polishing machine has been introduced by RA Power Solutions Pvt. Ltd. which is portable, lightweight, easy to operate, and can … Continue reading “Portable Crankshaft Polishing Machine – RA Power Solutions”